2024 John Deere 4 Series 4052M

2024 John Deere 4 Series 4052M

Swipe to View More

  • Year 2024
  • Make John Deere
  • Model 4 Series
  • Engine Family: EYDXL2.09TDA / FYDXL2.09TDA / GYDXL2.09TDA | model: 4TNV86CT-MJT
2024 John Deere 4 Series 4052M

2024 John Deere 4 Series 4052M

2024 John Deere 4 Series 4052M

  • Turbocharged diesel engine
  • PowrReverser™ or eHydrostatic Transmission options
  • Standard 4-wheel-drive
  • Category 1, 3-point hitch compatible with iMatch™ Quick-Hitch

Features may include:

Attractive styling provides improved visibility and serviceability

The bold styling of the 4M and 4R Tractors provide an attractive and functional appearance similar to that of the larger agricultural tractors. Benefits of this styling include:

  • Easy tractor family identification
  • Updated fixed grille and side panel hood design allows for optimum sealing of the cooling compartment
  • Front grille slides up to an integrated maintenance position for easy battery access
  • Easily removable cowl, allowing for serviceability access
  • Wraparound-style halogen headlights
  • Premium integrated automotive style headlight bezels
  • Bold graphics
  • Aggressively sloped hood design, giving a softer, smoother look and providing improved visibility
  • Hybrid exhaust in base on cab tractors for clear operator visibility and safety
  • At low speed and when tractor is in a filter cleaning process, exhaust will be routed through vertical exhaust outlet. In all other cases, the exhaust will be routed through the downward exhaust outlet.
  • Side exhaust in base on open operator station tractors and ensures minimal heat impact to operator

The result gives the tractor a distinctive appearance and feel.

Powerful Yanmar® diesel engine delivers plenty of power under heavy loads

The Yanmar diesel engine has a high-torque reserve that provides plenty of power under heavy load.

This 4-cylinder engine features lower levels of exhaust emissions and reduced noise levels. It meets EPA Final Tier 4 (FT4) emission standards.

Engine hp (kW), gross SAE J1995: 51.5 (37.9) at 2600 rpm, PS

Displacement, cu in. (L):128.15 (2.1)

The engine uses the latest technologies to optimize fuel economy, improve control and accuracy, and reduce environmental impact.

The common rail system (CRS) optimizes fuel economy and reduces operating costs. High-pressure injection atomizes fuel into finer particles which burn more completely. It results in improved fuel economy and lower cost of operation.

The electronic control unit (ECU) provides optimum fuel control and accuracy. ECU monitors and controls the engine. It continuously monitors engine conditions and adjusts the fuel delivery accordingly to ensure optimum performance and emissions.

The new engine comes with an after treatment system. The system operates automatically. The exhaust filter consists of a diesel particulate filter (DPF) which captures particulate matter (PM) contained in the exhaust gas. Using a natural cleaning process, most of the PM trapped in the exhaust filter is eliminated by the heat of the exhaust stream generated by normal use. In situations of low temperature, engine speed or load factor, an active cleaning cycle is initiated. In this cleaning cycle, the exhaust gas temperature is raised by injecting additional fuel during the exhaust stroke of normal vehicle operation to the diesel oxidation catalyst (DOC).

After many hours of use, the exhaust filter may require an ash removal service.

As compared to engines not using CRS technology.

DPF CLEANING

Depending on the load that the tractor is under, as well as ambient temperature, humidity, and engine speed, the DPF may build up with particulate matter, thus requiring cleaning. Filter cleaning is determined by one of three conditions:

  • A prescribed time-based estimation of needed filter cleaning
  • DOC/DPF pressure sensors

Engine

Engine Power SAE J1995 rated power: 50.8 hp (37.9 kW) / 2600 rpm at 51.5 PS
Engine Family: EYDXL2.09TDA / FYDXL2.09TDA / GYDXL2.09TDA | model: 4TNV86CT-MJT
Engine Manufacturer Yanmar®
Rated Engine Speed 2600 rpm
Aspiration Turbocharged
Emissions Final Tier 4
Cylinder Liners 4 | Cast-in-block
Displacement 127.6 cu in. (2.091 L)
Bore 90 in (86 mm)
Stroke 3.54 in. (90 mm)
Lubrication Pressurized
Cooling System Liquid
Air Cleaner Dual element
Engine Torque At rated speed: 102.5 lb-ft (139 Nm)

PTO

PTO Power, Rated Engine Speed 39.1 hp (29.2 kW) | Independent 540 rpm at 2600 rpm
PTO Type Control: Position

Fuel System

Fuel System High pressure common rail direct injection
Fuel Type Diesel

Drivetrain

Transmission Forward/reverse: PowrReverser transmission | Left-hand reverser: PowrReverser transmission only | gear ranges: PowrReverser: 12F/12R / eHydro: Infinitely-variable three range
Compression Ratio 19.1:1
Final Drive Planetary
Steering Hydrostatic power steering
Clutch wet/dry: Wet | Wet disc

Brakes

Brake System Type Multi-plate wet disc

Wheels & Tires

Tires, Front Specification Farm: 8-16 / Turf: 27x10.5-15 / Industrial: 10-16.5
Tires, Rear Specification Farm: 13.6-28 / Turf: 44x18-20 or 22.5LL-16.1 / Industrial: 16.9Lx24

Battery

Battery 770 CCA

Electric

Alternator 75 amp
Electrical Starter size: 2.68 hp (2 kW)

Hydraulics

Hydraulic Pump Steering: 6.2 gpm (23.5 L/min) / Implement: 11.2 gpm (42.3 L/min) / 17.4 gpm (65.8 L/min)
Hydraulic Type Draft control sensing: Position control | Remote control valves available: Up to three rear remotes
Injection Pump Type High pressure common rail direct injection
Pump Type Single gear

Chassis

Hitch/Type Category 1

Dimensions

Dimensions Clutch disk diameter wet clutch: 5.08 in. (129 mm) | Front axle clearance: 13.8 in. (25.1 cm) | Front tread range: 58.3 in. (148.1 cm) | Rear tread spacing: 54 in. (137.2 cm)
Wheelbase 73 in. (185.5 cm)
Turning Radius With brakes: 9.19 ft (2.8 m) | without brakes: 9.84 ft (3 m)

Capacities

Fuel Capacity 15 U.S. gal. (56.9 L)
Features Crankcase with filter: 1.4 gal. (5.3 L)
Hydraulic Capacity 12.5 gal (47.3 L)
Axle Capacity, Front 3528 lb (1600 kg)
Axle Capacity, Rear 5292 lb (2400 kg)
Hitch Lift Capacity 24-in. behind link arms: 2500 lb (1135 kg)

Weights

Weight, As Shipped Open station with hydrostatic transmission: 3668 lb (1664 kg) / Open station with PowrReverser transmission: 3754 lb (1703 kg)

Features

Features Rollover protective structure Type: Foldable | Rollover protective structure: Foldable ASABE S478 | Platform - flat/straddle: Flat | Gear shift location - console/floor: PowrReverser - Left-hand side

Product Photography